Generator Controls and Panels

Product Details:

We are manufacturing for generator control panels and power control panels with fire panels also - etc

Product Details:

GENSET CONTROLLERS

SEDEMAC is India''s #1 genset controls company and is expanding rapidly into "Africa, Middle East, and China regions." We have a dominating presence in India, owing to a strong relationship with major engine OEMs as their control partner.

SEDEMAC offers a unique one-stop solution to customers with its broad range of standard and customized controllers, electronic governors and control panels. We bring distinct offerings of genset controllers through innovation around the integration of supervisory and engine controls. This integration provides unparalleled value to the engine OEMs in terms of features, miniaturization and cost optimization. Our genset controller GC1200, is an apt example of such an integration. Also, see Electronic Governors.

For understanding the main features on SEDEMAC''s Genset Controllers, please click here: Feature comparison of SEDEMAC''s Genset Controllers 

FEATURES

• Genset controller with 5 digital inputs, 3 analog inputs (can also be used as digital inputs, if configured) and 6 digital outputs.
• Incremental counters for engine start, engine trips and engine run hours
• Supports the battery charging alternator I/O interface
• RPM sensing through frequency
• Preheat output for assisting engine start
• Monitors and controls genset performance effectively for 1-ph/3-ph
• Monitors 1-ph/3-ph voltage, frequency and power factor for genset
• Monitors engine safety parameters like voltage, speed, frequency, battery and charging alternator
• Auto mode through Remote start / stop feature
• Immediate phase reversal detection with configurable action
• Backlit and full graphics LCD with power saving feature (Deep Sleep mode) provides prolonged battery life
• Versatile software capable of saving "events" during operation (event log for 30 events with engine run hour information)
• PC connectivity via USB port
• Communicates with PC via configuration utility (Smart Config) through a USB port
• Access to each parameter through configuration utility (Smart Config) or control keys

Product Details:

We are dealing generator leyland, cummins , greaves , kirloskar , cat , mahindar , escort , eicher and etc spare parts and reapir and service

Product Details:

Key Specifications/Special FeaturesAVR model VR6
 
Technical data
 VR6
Specifications
K65-12BK125-10B
Output power (with 240V AC input) 12A DC at 65V DC max cfontainuous, 25A DC at 125V DC forcing for 10 seconds10A DC at 125V DC max continuous. 20A DC at 250V DC forcing for 10 seconds
AC input power 100 to 280V AC, single-phase 50 to 400Hz or 63 to 105V AC three-phase, 50 to 400Hz, 1092VA max continuous burden180 to 280V AC, single-phase or three-phase, 50 to 400 Hz, 1750 VA max continous burden
AC sensing voltage 90 to 140V AC, 50/60Hz, single-or-three phase
90 to 140V AC, 50/60Hz, single-or-three phase
External voltage adjust rheostat 10K ohms, 2W, potentiometer 10K ohms, 2W, potentiometer
Regulation accuracy +-0.5% average responding +-0.5% average responding
Voltage drift +-1% voltage variation for a 40 DegreeC change +-1% voltage variation for a 40 DegreeC
Response time <4 ms<4ms
Frequency compensation1 or 2V/Hz jumper selectable with knee adjustable from 45 Hz to 65 Hz1 or 2 V/Hz jumper selectable with knee adjustable from 45 to 65Hz
EMI suppressionInternal filterInternal filter
Voltage Build-UpInternal provisions for automatic voltage build-up from generator residual voltages as low as six VacInternal provisions for automatic voltage build-up from generator residual voltages as low as six V AC
Droop1 A or 5 A, <10 VA,adjustable from 0 to 10% at rated input current, 0.38 power factor1 A or 5 A, <10 VA,adjustable from 0 to 10% at rated input current, 0.38 power factor
Operating and storage temperature -40 to 70, 40 to 70 DegreeC
Shock withstands up to 20 g in each of three mutually perpendicular axesWithstands up to 20g in each of three mutually perpendicular axes
Vibtation withstands the following accelerations at the stated frequency 0.5g, 18 to 2000Hz
Withstands following accelerations at stated frequency 0.5g, 18 to 2000Hz

We sell more related AVR brands

Stamford
Marathon
Leroy Somer
Simens
Marelli
Caterpillar
Basler
Mecc Alte
Engga...

Product Details:

Explain:

1, the product is original new product.

2, when there is more than one product model, consider the specific models that need to be purchased.

3, showing the image and the specific model is not consistent, has been in kind prevail.

4, the sale of products for the new product, package installation, package use, package quality. can provide relevant product information, if necessary, please consult.

5, when you want to buy products, you can directly send orders. If the quantity is more, the price can offer, please consult.

Because too many models, not one for one screen, please get in touch! Welcome users, especially long-term cooperation distributors, will provide the best price, Thank you!

At the same time, provide various types of rotary rectifier, mxg series, and various models of diodes, SCR, sensors, actuators, AVR regulator, hydraulic valves and other electrical and mechanical accessories.

Your presence, it''s a pleasure!

Product Details:

Power Command Controller, for Cummins , 300-6014

Digital generator set PCC 2300 control kit

WE ARE ALL SO DEALING WITH 
PCC 1302 
PCC 2300
PCC 3300
MCM3320 
HMI FOR MCM 3320 
HMI 211 
HMI FOR PCC 3300 
AUX 101 
AUX 102 
AUX 103 
AUX 104 
AUX 105 

Product Details:

WE ARE DEALING EICHER GENERATOR SPARE PARTS WITH CONTROLLER AND SERVICE SUPPORT

Product Details:

WE ARE DEALING ALL MODELS DEEP SEA CONTROLLERS AND GENERATOR CONTROL PANEL SPARE PARTS

Product Details:

Cummins Genset Controller PSO 600.Having all the safeties, controlls and displays. User free controller and easy to configure. Genuine product and having company warrenty.Genuine product and having company warrenty and support.

Product Details:

we are dealing for engine controls and generator all spare parts and other  brand dg spars allso

Product Details:

Product Description

1. ESD5330
2. Function most completely,
3. Big power
4. Suits for diesel generator and gas generator
5. Weigt 1.3kg

Cummins generating GAC Controller ESD5330
Remote Variable Speed Range 25 to 100% of rated speed

Cummins generating GAC Controller ESD5330
Product Description
GAC ESD5330 INTRODUCTION
The ESD5330 Series speed control unit is designed to precisely control engine speed and provide fast precise response to transient engine loads. This speed control is intended to be used with all GAC Actuators including the ACB2000. A complete closed loop control system is formed with the addition of a magnetic pickup signal sensing engine speed and 24 Volt DC power.

The ESD5330 Series has several special built in features
* A Two Element Speed Switch (overspeed sensing and crank termination)
* Speed Ramping from Idle to Operating Speed
* A unique actuator power drive circuit
Other standard features include Adjustable Droop, Accessory inputs for load Sharing, Variable Speed Governing, protection against reverse battery voltage and transient voltages and a fail safe design in the event of loss of speed signal or battery supply.

ESD5330 SERIES SPEED CONTROL UNIT
ESD5330------Standard Unit, 24 Volt operation ESD5331----------use w/EFC Actuator
ESD5330-12--------------------12 Volt operation ESD5331-12------use w/EFC Actuator

PERFORMANCE
Isochronous Operation/Steady State Stability +- 0.25% or better
Operation Speed Range 1K-7.5K Hz continuous
Speed Drift with Temperature +- 1% maximum
Idle Speed Adjust Range 25-85% of rated speed
Droop Range Adjustable from 0-5% for a 1.5 A actuator current change
Speed Trim Range +- 200 Hz
Remote Variable Speed Range 25 to 100% of rated speed
Speed Ramp Time Acceleration adjustment range 266 Hz/Sec to 1300 Hz/Sec
Deceleration adjustment range 250 Hz/Sec to 1000 Hz/Sec
Starting Fuel Adjustment
0-1.5A 120, 175, 225, 275 Actuators/SW2-7 OFF
0.3-4A 2000 A
Overspeed Set Point 2400 Hz to 8300 Hz
Crank Termination Set Point 200 Hz to 2050 Hz
Terminal Sensitivity

ENVIRONMENTAL
Ambient Operating Temperature Range -40@ +185@ F (-40@ to ~+85o C)
Relative Humidity (Noncondensing) Up to 95%
All Surface Finishes Fungus proof & corrosion resistant

INPUT POWER-Nominal Ratings
DC Supply 24 +- 20% VDC battery systems ( transient and reverse voltage protected)
Maximum Continuous DC Supply Voltage 32 Volts
Polarity Negative ground (Case isolated)
Power Consumption (Engine Stopped) 100 MA (No actuator current)
Speed Sensor Signal 0.5-120 Volts RMS
Maximum Actuator Current Internally limited to 9A continuous
Maximum Current, Speed Switch Contact (Terminals 1-6) 6 AMPS

RELIABILITY
Vibration 1G @ 20-100Hz
Shock 10 G (11 ms)
Testing 100% Functionally tested

PHYSICAL
Dimensions See FIGURE 1 Wiring Diagram and Outline (page 3)
Weight 2.0 Ibs (0.91 grams)
Mounting Any position, vertical preferred

EMC
Conforms to CE directive for light and heavy industrial usage when installed in accordance with special instructions and as per the wiring diagram which is found in PIB 1041.
4)Power Consumption 50 ma continuous plus acutator current
5)Maximum Actuator Current at 25celsius(77celsius F) 10 AMPS continuous
6)Weight 0.7kg

Product Details:

WE ARE DEALING ALL CUMMINS CONTROL MODULES AND CONTROLLS WITH ENGINE ALL SPARES 

Product Details:

KTA-19-G9 Cummins Application DG SET WITH ALL ENGINE MODELS CONTROLLERS AND PANELS

Product Details:

ADD175A-12 or -24 - Governors America Corp,Engine Actuator Adc175,Actuator ADC175 24V electric push rod linear actuator diesel cylinder,Diesel Generator 24V External Actuator ADC175 ADC175 24V-in,ADC175 Electric Generator Diesel Part 12V 24V Actuator, ADC120-S24V External actuator,Series Electric Actuator Adc175 ( 12v or 24v ) for Generator,
Brief Introduction:
1.The 175 SERIES electric actuator is designed to mount directly on "P" size fuel injection
pump, with a right hand, rack, in palce of the mechanical governor. When the 175 actuator is
installed on the fuel pump, an optimum performance, long life fuel control system results. An
external fuel shut off lever is provided to manually override the actuator's control. Also provided
is an adjustable internal maximum fuel limit.

2.The 175 Series Electric Actuator can control fuel pumps of up to 8 cylinders. The actuator was
designed with two isolated chambers. The upper chamber is wet with oil and contains the
connection to the fuel rack and an optional manual shut off mechanism. The sealed lower chamber
contains the electromagnetic components.

Details Description:

Product Details:

ADD175A-12 or -24 - Governors America Corp,Engine Actuator Adc175,Actuator ADC175 24V electric push rod linear actuator diesel cylinder,Diesel Generator 24V External Actuator ADC175 ADC175 24V-in,ADC175 Electric Generator Diesel Part 12V 24V Actuator, ADC120-S24V External actuator,Series Electric Actuator Adc175 ( 12v or 24v ) for Generator.
Diesel Generator Engine Actuator ADC120 are proportional electro servo designed for mechanical actuation of fuel system control levers. They exhibit uniquely optimized fuel control and will outperform externally mounted electric actuators. Its sealed integral actuators are simple to install and possess no sliding parts, resulting in outstanding reliability and no maintenance required.

Details Description:

Product Details:

ADD225-12 or -24 - Governors America Corp,Engine Actuator Adc225,Actuator ADC225 24V electric push rod linear actuator diesel cylinder,Diesel Generator 24V External Actuator ADC225 ADC 225 24V-in,ADC 225 Electric Generator Diesel Part 12V 24V Actuator, ADC 225-S24V External actuator,Series Electric Actuator Adc 225 ( 12v or 24v ) for Generator.

Product Details:

Brief Introduction:

1.External Actuator ADC300 
2.motor operated valve actuator 
3.Actuator 225-12V 
4.Genset Actuator 225-24V

Actuator 225-24VSpecifications

external actuator, 
generator actuator 
225-24V, 
225-12V, 

Universal type for engines with 100 to 500kW rated power

225 ("MIL", amphenol connector, die cast housing, 12 and 24 volts)

225SC (2 pin mating packard connector included, 12 or 24 volts)

225F (includes position feedback sensorfor fuel control, 12 or 24 volts)

225 Series  

2.2 lb-ft of torque, 25° rotation, < 45 msec. response

Low cost, versatile model

Suitable for multi-plunger fuel pumps and medium size carburetors

Various models offer a variety of connectors and wiring harnesses, including feedback sensor

Outstanding reliability and performance

 

Specification 

 

 

Product Details:

we are dealing cummins controls with pcc / power command and all controll systems

Product Details:

Product Details:

2018 NEW type Generator Speed Controller ESD5500E and we all so dealing with generator spare parts